NEWS
NEWS
HOME > NEWS > Industral news > Details

Contact Us

Industral news

Effect of material characteristics on sand production rate of sand making machine

Release time:Apr.08.2024 Views:0

In fact, in actual production, in addition to the performance of the sand making machine itself, there are also some other external factors that affect the sand production rate of the sand making machine, such as: the hardness, viscosity, moisture content, composition, and finished sand of the material.(Stone crusher) Fineness requirements, etc.

PCK Series Sand Making Machine

New high-resistant single rotor

The following is an analysis of factors affecting sand production rate:

Hardness: In actual production, the hardness of the ore itself has a great impact on the difficulty of crushing. The higher the hardness of the sand-making material, the greater its density and the more difficult it is to crush. Therefore, the lower the sand formation rate.

Viscosity: The greater the viscosity of the raw material, the easier it is to adhere. It will adhere to the inner wall of the crushing chamber of the sand making machine during the sand making process. If not cleaned in time, it will affect the working efficiency and sand production rate of the sand making machine, and in serious cases, it will damage the sand making machine. machine, reducing the service life of the sand making machine.

Humidity: When the material is crushed in the sand making machine, if the moisture content of the material is high, it will not only easily adhere to the inner wall of the crushing cavity of the sand making machine, but also be easily blocked during the unloading and transportation process, resulting in a reduction in the output of the sand making machine. Reduce the sand production rate of the sand making machine.

Composition: The fine powder content of the material will affect the efficiency and sand production rate of the sand making machine, because the fine powder is adhesive and will affect the transportation, thereby affecting the sand production rate.

Finished sand fineness requirements: The higher the fineness requirements of the sand making machine, that is, the finer the finished material is required, the smaller the sand making capacity will be, so the lower the sand formation rate will be.

To sum up, different raw materials of machine-made sand will have certain differences in hardness, viscosity, humidity, composition, etc., and the sand production volume will also vary according to the different crushed materials.

New high resistance base picture

New high resistance base picture 1.jpg

That is to say, if the property parameters of the raw materials for machine-made sand do not match the working parameters of the sand making machine, for example, the hardness and moisture content of the material do not meet the predetermined parameters of the sand making machine, then the sand production rate of the sand making machine will be greatly reduced. Therefore, sand making machine equipment with good performance is the foundation, and the adaptability of material properties and equipment working parameters is also an important prerequisite for determining the sand formation rate.

As an expert in sand and gravel aggregate crushing production line solutions, our Xingaonai Heavy Industry can not only provide customers with crushing and screening equipment and services from a single unit to a complete system, but also has professional technology covering the entire process chain of material processing. We focus on different Whether it is the production of sand and gravel aggregates, the utilization of construction waste resources, or the grinding and processing of metal ores, we are the first choice.